| 3 036 Rollix Slewing Ring Bearings | Oil:8 400 min-1; Grease:0.400 kN; with cylindrical bore:10 000 min-1; d:30 mm; B1:mm; rs Dynamic (Cr):1.1 mm; Static (Cor):32.340 kN; B:27 mm; Pu:8.740 kN; with tapered bore:2306 ; D:72 mm; |
| 121.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings | Preload class B GB:120 N; Basic static load rating C0:5 kN; Db max.:45 mm; B:12 mm; Da max.:43.8 mm; r3,4 min.:0.3 mm; Preload class D GD:480 N; Preload class C GC:240 N; Static axial stiffness, preload class D:159 N/µm; ra max.:0.6 mm; a:14.5 mm; Static axial stiffness, preload class A:71 N/µm; D1:39.9 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Static axial stiffness, preload class B:92 N/µm; |
| 91.30.1799.991.21.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:4000 rpm; Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Dynamic Radial Load Rating C:39000 N; D:175.0000 mm; B:18.00 mm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:46500 N; d:140.000 mm; Sealed Speed Rating n3:2000 rpm; |
| 92.40.2003.991.41.1502 Standard 5 Slewing Ring Bearings | Stabilizing ring:SR-24-20; P90°:149 kN; H2:53.975 mm; Mass pillow block:64 kg; H1:133.35 mm; Taconite seal:TER 111; End plug (suffix Y):EPR 14; P150°:87.2 kN; Cap bolt, SAE grade:8; L:419.1 mm; R1:79.375 mm; P120°:94.3 kN; Cap bolt:5/8-11 UNC; R2:30.163 mm; h:46.831 mm; A1:120.65 mm; Da:215.001 mm; A2:250.825 mm; RG:1/2 NPT; ba:53.181 mm; |
| 12.30.1800.000.11.1503 Standard 5 Slewing Ring Bearings | B:60 mm; d1:410 mm; B1:228 mm; d3:520 mm; G2:M 8; G:Tr 440x5; A:6.5 mm; Hydraulic nut:HMV 88E; Mass adapter sleeve assembly:63 kg; B5:77 mm; d:440 mm; G3:12 mm; |
| 121.32.4250.990.41.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:30000 rpm; Basic Static Radial Load Rating Co:1460 N; Grease Speed Rating Open/Shielded n1:24000 rpm; Accessories:Two Seals; B:5.00 mm; Sealed Speed Rating n3:16000 rpm; Fillet Radius ra:0.30 mm; D:26.0000 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:2250 N; |
| 12.30.1800.001.41.1503 Standard 5 Slewing Ring Bearings | Accessories:One Shield; Sealed Speed Rating n3:8500 rpm; Oil Speed Rating Open/Shielded n2:15000 rpm; D:62.0000 mm; B:17.00 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:22900 N; Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Static Radial Load Rating Co:10800 N; d:17.000 mm; |
| 191.50.3550.990.41.1502 Standard 5 Slewing Ring Bearings | Fw:10 mm; Basic static load rating C0:5.7 kN; Reference speed:28000 r/min; Basic dynamic load rating C:4.57 kN; Fatigue load limit Pu:0.63 kN; Mass needle roller and cage assembly:0.0016 kg; Limiting speed:32000 r/min; Ew:13 mm; U:10 mm; |
| 161.36.1900.891.41.1503 Standard 5 Slewing Ring Bearings | N:10.7 mm; L:83 mm; A1:13.3 mm; Basic static load rating C0:11.2 kN; Mass bearing unit:0.48 kg; Recommended tightening torque for grub screw:4 N·m; T:41.5 mm; J1:31.8 mm; Basic dynamic load rating C:16.3 kN; Housing material:Composite for food a; Thread grub screw G2:1/4-28 UNF; H:138 mm; A5:26.9 mm; Fatigue load limit Pu:0.475 kN; Limiting speed with shaft tolerance h6:3800 r/min; A:32 mm; |
| 8 0307 Rollix Slewing Ring Bearings | Sealed Speed Rating n3:950 rpm; B:65.00 mm; Grease Speed Rating Open/Shielded n1:1000 rpm; d:380.000 mm; D:520.0000 mm; Basic Static Radial Load Rating Co:530000 N; Accessories:Without Accessories; Fillet Radius ra:4.00 mm; Oil Speed Rating Open/Shielded n2:1300 rpm; Basic Dynamic Radial Load Rating C:338000 N; |
| 162.45.2240.891.41.1503 Standard 5 Slewing Ring Bearings | db min.:62 mm; Basic dynamic load rating C:130 kN; B:28 mm; Basic static load rating C0:140 kN; ra max.:3 mm; Reference speed:6000 r/min; r1,2 min.:3 mm; rb max.:2.5 mm; C:23 mm; a:20.024 mm; Ca min.:5 mm; da max.:58 mm; d:50 mm; Da max.:80 mm; Mass bearing:0.75 kg; Limiting speed:7500 r/min; r3,4 min.:2.5 mm; D:90 mm; d1 ≈:68.8 mm; Da min.:78 mm; |
| 192.20.1800.990.41.1502 Standard 5 Slewing Ring Bearings | Tolerance shaft:h8; Coefficient of friction µ max.:0.1; D:30 mm; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; Coefficient of friction µ min.:0.05; d:25 mm; B:25 mm; Specific static load factor K0:20 N/mm²; Specific dynamic load factor K:10 N/mm²; Mass bushing:0.036 kg; |