| 91.35.1704.990.11.1502 Standard 5 Slewing Ring Bearings | A3:3.2 mm; d:30 mm; Basic static load rating C0:11.2 kN; Limiting speed:1200 r/min; Fatigue load limit Pu:0.475 kN; Housing material:Composite; Recommended diameter for attachment bolts, mm G:10 mm; L:108 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Db:78 mm; B1:37 mm; Recommended tightening torque for grub screw:4.2 N·m; Hexagonal key size for grub screw N:2.5 mm; N:12.3 mm; |
| 11.35.1750.701.41.1503 Standard 5 Slewing Ring Bearings | Fillet Radius ra:0.64 mm; d:15.000 mm; Basic Dynamic Radial Load Rating C:14800 N; Fillet Radius rb:0.30 mm; D:35.0000 mm; B:22.00 mm; Basic Static Radial Load Rating Co:9500 N; Oil Speed Rating n2:21000 rpm; Grease Speed Rating n1:16000 rpm; |
| 32 0541 01 Rollix Slewing Ring Bearings | Basic Static Radial Load Rating Co:86500 N; Fillet Radius ra:2.00 mm; Accessories:Two Seals & Snap-Rin; Oil Speed Rating n2:4500 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; B:39.00 mm; Sealed Speed Rating n3:2600 rpm; Basic Dynamic Radial Load Rating C:124000 N; d:80.000 mm; Grease Speed Rating n1:3800 rpm; D:170.0000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; |
| 11.40.2240.001.41.1502 Standard 5 Slewing Ring Bearings | Fillet Radius ra:1.00 mm; Oil Speed Rating n2:10000 rpm; B:32.00 mm; d:30.000 mm; D:62.0000 mm; Grease Speed Rating n1:7500 rpm; Basic Static Radial Load Rating Co:25500 N; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:34500 N; |
| 12.30.1800.001.41.1503 Standard 5 Slewing Ring Bearings | Accessories:One Shield; Sealed Speed Rating n3:8500 rpm; Oil Speed Rating Open/Shielded n2:15000 rpm; D:62.0000 mm; B:17.00 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:22900 N; Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Static Radial Load Rating Co:10800 N; d:17.000 mm; |
| 92.40.2003.990.11.1502 Standard 5 Slewing Ring Bearings | Eye bolt, size:2 x M 24; Cap bolt, size:M 30x200; P150°:1600 kN; Oil level, max.:89 mm; Q150°:1650 kN; Cap bolt, rec. tightening torque:400 N·m; J6:740 mm; J:670 mm; s:16 mm; A2:315 mm; P180°:2000 kN; P55°:5000 kN; da:280 mm; N4 max.:20 mm; Pa:1300 kN; P120°:1800 kN; N:50 mm; H1:280 mm; Q120°:2860 kN; H:551 mm; |
| 11.40.2619.001.41.1502 Standard 5 Slewing Ring Bearings | Static (Cor):27.300 kN; rs Dynamic (Cr):1.5 mm; with cylindrical bore:7 500 min-1; Oil:6 300 min-1; d:55 mm; D:100 mm; with tapered bore:2211 ; Grease:0.450 kN; B1:mm; Pu:10.000 kN; B:25 mm; |
| 35 0541 01 Rollix Slewing Ring Bearings | d:3.200 mm; Fillet Radius ra:0.30 mm; Shielded or Sealed B1:4.4 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:312 N; Basic Static Radial Load Rating Co:120 N; Width Plain B:4.4 mm; Grease Speed Rating Open/Shielded n1:75000 rpm; D:12.7000 mm; Oil Speed Rating Open/Shielded n2:91000 rpm; Sealed Speed Rating n3:52000 rpm; |
| 23 0411 01 Rollix Slewing Ring Bearings | G:Tr 710x7; h:30 mm; b:55 mm; Mass lock nut:186 kg; B:106 mm; d1:825 mm; d2:772 mm; Associated eyebolt for handling:M 16; d3:900 mm; B5:133 mm; Associated spanner:TMFN 600-750; |
| 191.32.2240.990.41.1502 Standard 5 Slewing Ring Bearings | H:398.462 mm; Stabilizing ring:SR-38-32; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; H2:79.375 mm; P60°:416 kN; Max. speed for Taconite seal:440 r/min; P90°:249 kN; H1:200.025 mm; R2:42.069 mm; P180°:160 kN; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; A2:339.725 mm; Mass pillow block:217 kg; Initial grease fill:1672.65 g; P150°:136 kN; Da:339.999 mm; J max.:619.125 mm; |
| 62.50.1800.001.49.1504 Standard 5 Slewing Ring Bearings | ra max.:1 mm; b:13.5 mm; rb max.:1 mm; α:6 °; Basic static load rating C0:7650 kN; D:260 mm; Specific static load factor K0:500 N/mm²; r2 min.:1.1 mm; dk:225 mm; Da max.:250.5 mm; Material constant KM:330; C:80 mm; Sealing solution:Triple-lip seals; Design (sliding contact surface combination):Steel/steel; b1:13.5 mm; Mass plain bearing:18.5 kg; da max.:199 mm; r1 min.:1.1 mm; M:6 mm; Basic dynamic load rating C:2280 kN; |
| 191.50.6300.990.41.1502 Standard 5 Slewing Ring Bearings | Cap bolt recommended tightening torque:81.3 N·m; P90°:32.5 kN; H2:28.575 mm; Mass pillow block:12.7 kg; Appropriate attachment bolt size G:0.5 in; Cap bolt, SAE grade:5; J max.:244.475 mm; Ca:37.008 mm; Housing:FSAF 515; Bearing limiting speed:6700 r/min; P180°:22.2 kN; Initial grease fill:136.08 g; ba:30.163 mm; PG:1/8 NPT; End plug (suffix Y):EPR 7; A2:118.666 mm; RG:1/4 NPT; N1:15.875 mm; |