| No. | Brand | J | N | b | H | S | h | a | F |
| CF30-2BUUR | IKO | - | - | - | - | - | - | - | - |
| BA1014ZOH | IKO | 840 mm | - | - | - | - | - | - | - |
| CFE 10-1 BUUR | IKO | - | 32 mm | - | 238 mm | 2.5 mm | - | - | - |
| BA47ZOH | IKO | - | - | 7.2 mm | - | - | - | - | - |
| POS18A | IKO | - | - | - | - | - | - | - | - |
| NAG4906UU | IKO | - | - | - | - | - | - | - | - |
| SB45A | IKO | - | - | - | - | - | - | - | - |
| IRT5040-1 | IKO | - | - | - | - | - | - | - | - |
| CR24BUU | IKO | - | - | - | - | - | - | - | - |
| CF10-1VUU | IKO | - | - | - | - | - | - | 31.781 mm | - |
| SB25A | IKO | - | - | - | - | - | - | - | - |
| TAF455530 | IKO | - | - | - | - | - | - | - | - |
| NAG4904 | IKO | - | - | - | - | - | - | - | - |
| AZK609511 | IKO | - | - | - | - | - | - | - | - |
| AZK15283.5 | IKO | - | - | - | - | - | - | - | - |
| AZK24031524 | IKO | - | - | - | - | - | - | - | - |
| SBB142RS | IKO | - | - | - | - | - | - | - | - |
| BR263516 | IKO | - | - | - | - | - | - | - | - |
| CF10-1VUURM | IKO | - | - | 13.9 mm | - | - | - | - | - |
| NURT45-1R | IKO | - | - | - | - | - | - | - | - |
| CL20 | IKO | - | - | - | - | - | - | - | - |
| WS85110 | IKO | - | - | - | - | - | - | - | - |
| TLA2820Z | IKO | - | - | - | 62 mm | - | - | - | - |
| LRTZ172214 | IKO | - | - | - | - | - | - | - | - |
| CFE20UU | IKO | - | - | - | - | - | - | - | - |
| IKO CF10VM Cam Follower and Track Roller - Stud Type | a:9.7 mm; d1:35.6 mm; Ball diameter Dw:4.762 mm; Static axial stiffness, preload class C:47 N/µm; db min.:32 mm; ra max.:0.3 mm; d:30 mm; Static axial stiffness, preload class A:26 N/µm; Preload class C GC:100 N; B:9 mm; |
| 1.5 Inch | 38.1 Millimeter x 1.875 Inch | 47.625 Millimeter x 0.625 Inch | 15.875 Millimeter IKO BA2410ZOH Needle Non Thrust Roller Bearings | Mass bearing:0.07 kg; Attainable speed for grease lubrication:40000 r/min; Calculation factor f2D:1.08; Db max.:45 mm; da min.:28.2 mm; Calculation factor f2C:1.05; r3,4 min.:0.3 mm; Calculation factor f2B:1.02; d2:32.1 mm; r1,2 min.:0.6 mm; Size (mm):1.5 Inch | 38.1 Millimeter x 1.875 Inch | 47.625 Millimeter x 0.625 Inch | 15.875 Millimeter ; |
| 1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 0.787 Inch | 20 Millimeter IKO LRT354220-S Needle Non Thrust Roller Bearings | Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:78100 N; Sealed Speed Rating n3:3800 rpm; Basic Static Radial Load Rating Co:88000 N; Fillet Radius ra:1.50 mm; d:60.000 mm; B:36.50 mm; Accessories:One Seal; Grease Speed Rating n1:3800 rpm; D:110.0000 mm; Size (mm):1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 0.787 Inch | 20 Millimeter ; |
| 0.563 Inch | 14.3 Millimeter x 0.75 Inch | 19.05 Millimeter x 0.75 Inch | 19.05 Millimeter IKO BA912ZOH Needle Non Thrust Roller Bearings | d:384.175 mm; Thrust factor K:1.24; Calculation factor Y2:3; r3,4 min.:6.4 mm; Comparative axial load rating CFa:278 kN; d1 ≈:419 mm; Basic static load rating C0:16600 kN; D1 ≈:484 mm; Design variant/feature:TQON/GW; Fatigue load limit Pu:1290 kN; Size (mm):0.563 Inch | 14.3 Millimeter x 0.75 Inch | 19.05 Millimeter x 0.75 Inch | 19.05 Millimeter ; |
| IKO CR20R Cam Follower and Track Roller - Stud Type | Width A:23.8 mm; Dimension L:65.1 mm; Basic Static Radial Load Rating Co:6550 N; Dimension F:11.1 mm; Dimension C:42.9 mm; Insert Bearing IB:Stainless Steel; Diameter G:10.3 mm; Shaft Diameter D:20 mm; Dimension B:110.3 mm; Pin Dia BS:3/8; |
| IKO NAG4904 Plain Bearings | d3 max.:112.039 mm; Hydraulic nut:HMVC 17E; B1:83.871 mm; Mass adapter sleeve assembly:1.55 kg; Threads per inch:12; d1:73.025 mm; Lock nut:AN 17; B4:17.704 mm; Sleeve:S 117x2.7/8; Lock washer:W 17; |
| IKO AZ406013 Roller Bearings | da min.:1344 mm; Mass bearing:1820 kg; B:300 mm; D:1720 mm; r3,4 min.:7.5 mm; K:12 mm; Calculation factor kr:0.15; rb max.:6 mm; ra max.:6 mm; Basic static load rating C0:34500 kN; |
| IKO CF10UUR Cam Follower and Track Roller - Stud Type | Lock nut:N 084; Mass adapter sleeve assembly:75 kg; Locking plate:PL 84; B5:63.5 mm; Sleeve:S 3284x15.3/4; d3 max.:490.677 mm; d:420 mm; d1:400.05 mm; Threads per inch:5; G:418.998 mm; |
| 1.772 Inch | 45 Millimeter x 1.969 Inch | 50 Millimeter x 1.063 Inch | 27 Millimeter IKO KT455027 Needle Non Thrust Roller Bearings | d:35.000 mm; Basic Dynamic Radial Load Rating C:26500 N; B:31.00 mm; Grease Speed Rating n1:5600 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:8500 N; D:80.0000 mm; Size (mm):1.772 Inch | 45 Millimeter x 1.969 Inch | 50 Millimeter x 1.063 Inch | 27 Millimeter ; |
| 0.276 Inch | 7 Millimeter x 0.433 Inch | 11 Millimeter x 0.354 Inch | 9 Millimeter IKO TLA79Z Needle Non Thrust Roller Bearings | Cap bolt, size:M 20x100; Locating ring:2 x FRB 12/180; Q150°:360 kN; Housing:FSNL 520-617 RU; Appropriate attachment bolt, rec. tightening torque:200 N·m; P0°:470 kN; End cover:ASNH 520-617 R; J:320 mm; N1:18 mm; A1:110 mm; Size (mm):0.276 Inch | 7 Millimeter x 0.433 Inch | 11 Millimeter x 0.354 Inch | 9 Millimeter ; |
| 1.102 Inch | 28 Millimeter x 1.378 Inch | 35 Millimeter x 0.787 Inch | 20 Millimeter IKO TLA2820Z Needle Non Thrust Roller Bearings | D1:204 mm; Oil:1 000 min-1; dynamic Cr:376.640 kN; H:62 mm; rs (min):2 mm; Pu:36.380 kN; D:280 mm; Grease:750 min-1; d1:277 mm; static Cor:1240.000 kN; Size (mm):1.102 Inch | 28 Millimeter x 1.378 Inch | 35 Millimeter x 0.787 Inch | 20 Millimeter ; |
| 1.375 Inch | 34.925 Millimeter x 1.625 Inch | 41.275 Millimeter x 0.75 Inch | 19.05 Millimeter IKO BA2212ZOH Needle Non Thrust Roller Bearings | Sealed Speed Rating n3:2400 rpm; D:180.0000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:124000 N; Accessories:Two Shields & Snap-R; Oil Speed Rating Open/Shielded n2:4000 rpm; Oil Speed Rating n2:4000 rpm; Grease Speed Rating Open/Shielded n1:3400 rpm; B:34.00 mm; d:100.000 mm; Size (mm):1.375 Inch | 34.925 Millimeter x 1.625 Inch | 41.275 Millimeter x 0.75 Inch | 19.05 Millimeter ; |
| 0.709 Inch | 18 Millimeter x 0.866 Inch | 22 Millimeter x 0.63 Inch | 16 Millimeter IKO KT182216C3 Needle Non Thrust Roller Bearings | J:105 mm; Recommended diameter for attachment bolts, inch G:0.5625 in; Mass bearing unit:2.1 kg; J6:123 mm; Thread grub screw G2:M10x1; Db2:112 mm; Fatigue load limit Pu:0.915 kN; N:16 mm; d:45 mm; Hexagonal key size for grub screw N:5 mm; Size (mm):0.709 Inch | 18 Millimeter x 0.866 Inch | 22 Millimeter x 0.63 Inch | 16 Millimeter ; |
| IKO CR26B Cam Follower and Track Roller - Stud Type | l1 min.:86 mm; G:M 39x3; Mass rod end:1.85 kg; C1 max.:24 mm; α:7 °; Material constant KM:330; B:28 mm; d:40 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:94 mm; |
| IKO CF10-1VUU Cam Follower and Track Roller - Stud Type | Fatigue load limit Pu:46.5 kN; Mass bearing:3.41 kg; Ca min.:8 mm; Da max.:137.5 mm; B:46.672 mm; ra max.:3.5 mm; Calculation factor Y:1.8; D:150.089 mm; a:31.781 mm; db min.:96.5 mm; |
| IKO CF12VUU Cam Follower and Track Roller - Stud Type | D:479.425 mm; d1 ≈:430.9 mm; Calculation factor Y0:0.7; db min.:413 mm; Fatigue load limit Pu:120 kN; r3,4 min.:3.3 mm; d:381 mm; Da min.:448 mm; Calculation factor Y:1.2; Basic dynamic load rating C:638 kN; |
IKO CR22VUUR Cam Follower and Track Roller - Stud Type Video
CR22VUUR - IKO Inch Series Cam Followers CR - Quality ...
Product: CR22VUUR IKO Inch Series Cam Followers CR Full Compliment Type |Brand: IKO | |In Stock |All Orders Shipped via DHL |Quality Bearings Online LTD.
IKO Inch Series Cam Followers CR – Full Compliment Type
Brand: IKO Original:Japan Availability:In Stock Dimensions (mm) Basic Dynamic Load Rating (N) Basic Static Load Rating (N) Brand d1 D G C Max. B Max.
IKO CR22VUUR Cam Follower and Track Roller - Lily Bearing ...
Looking for IKO CR22VUUR BEARING? Price $27.5 + Free Shipping! Easy online ordering with 24/7 expert product support.Roller Width: 0.75 Inch | 19.05 MillimeterThread Size: 1/2-20Other Features: Full Complement | Screwdriver ...Seal Type: Sealed
IKO CR22VUUR Accesorios de Cam y orugas de rueda - Poste ...
Category. Cam Follower and Track. Roller - Stud Type. Inventory. 0.0. Manufacturer Name. IKO. Minimum Buy Quantity. N/A. Weight. 0.16. Product Group.
IKO cr22vuur bearing - IKO inch series cam followers cr ...
SKU: cr22vuur-iko ; Availability: In Stock ; Weight: 0.1700 KGS ; Width (inch):: 1.3/8 inch ; Dynamic Load Rating (kN):: 23.6
IKO CR22-V - SP-SpareParts
CR22-V Cam Follower. Inner Diameter: 12.70, Outer Diameter: 34.93, Width: 19.05, Weight: 160.
CR22VUUR - IKO | Cam Follower and Track Roller - Stud Type
IKO IKO. CR22VUUR · 1-3/8" Roller Diameter; 3/4" Roller Width; Crowned Roller Surface Profile; 1/2" Stud Diameter; 1/2-20 Thread Size; Standard Stud Stud Profile ...