IKO CRH9V Cam Follower and Track Roller - Stud Type

No.	Brand	J	N	b	H	S	h	a	F
TLAM1312	IKO	-	-	-	53 mm	-	-	-	-
CF3	IKO	-	-	-	-	-	-	-	-
LRT172216-S	IKO	-	-	-	-	-	-	-	-
LRT151916	IKO	-	-	-	-	-	-	-	-
CFE10-1UU	IKO	-	-	-	-	-	-	-	-
TAF739035	IKO	177.8 mm	-	-	-	0.794 mm	-	5.556 mm	-
TLA79Z	IKO	320 mm	-	-	-	-	-	-	-
NAST15R	IKO	-	-	-	-	-	-	-	-
LHSA5	IKO	-	-	-	-	-	-	-	-
CFE 10-1 BUUR	IKO	-	32 mm	-	238 mm	2.5 mm	-	-	-
TAF10012026	IKO	-	-	-	-	-	-	-	-
CFES12	IKO	-	-	-	-	-	-	-	-
BA108ZOH	IKO	-	-	9 mm	-	-	-	-	-
RNA4976	IKO	-	-	-	-	-	-	-	-
SB7011058	IKO	-	-	mm	-	-	-	-	-
CFFU1-6	IKO	-	-	-	-	-	-	-	-
CF10-1VUURM	IKO	-	-	13.9 mm	-	-	-	-	-
TAF182620	IKO	-	-	-	-	-	-	-	-
RNA6915	IKO	-	-	-	-	-	-	-	-
WS85110	IKO	-	-	-	-	-	-	-	-
CR24VB	IKO	-	-	-	-	-	-	-	-
CFSFU-16	IKO	-	-	-	-	-	-	-	-
LRT9010535	IKO	-	-	-	-	-	-	-	-
RNAFW354732	IKO	-	-	-	-	-	-	-	-
BAM1214	IKO	-	-	-	-	-	-	-	-

IKO CF30BUUR Cam Follower and Track Roller - Stud Type	r1 max.:0.6 mm; r2 max.:0.8 mm; Mass needle roller:0.54 g; Dw:2 mm; Lw:21.8 mm; r1,2 min.:0.2 mm;
1.625 Inch \| 41.275 Millimeter x 2.188 Inch \| 55.575 Millimeter x 1 Inch \| 25.4 Millimeter IKO BR263516 Needle Non Thrust Roller Bearings	P180°:1900 kN; P120°:1700 kN; H2:100 mm; J1:160 mm; Pa:1200 kN; P0°:3800 kN; A:315 mm; Cap bolt, size:M 30x200; Locating ring:2 x FRB 10/440; Cap bolt, rec. tightening torque:400 N·m; Size (mm):1.625 Inch \| 41.275 Millimeter x 2.188 Inch \| 55.575 Millimeter x 1 Inch \| 25.4 Millimeter ;
IKO CF10BUU Cam Follower and Track Roller - Stud Type	N1 max.:28.5 mm; l7 min.:29 mm; N max.:50 mm; h1:60 mm; Material constant KM:330; l4 max.:95 mm; d:30 mm; G:M 22x1.5; B:22 mm; d4 max.:33 mm;
IKO AZ406013 Roller Bearings	da min.:1344 mm; Mass bearing:1820 kg; B:300 mm; D:1720 mm; r3,4 min.:7.5 mm; K:12 mm; Calculation factor kr:0.15; rb max.:6 mm; ra max.:6 mm; Basic static load rating C0:34500 kN;
IKO SBB682RS Plain Bearings	Number of balls z:15; Static axial stiffness, preload class D:56 N/µm; da min.:22 mm; da max.:25.1 mm; Calculation factor f2D:1.15; Mass bearing:0.037 kg; Calculation factor f2B:1.04; db min.:22 mm; Preload class C GC:100 N; r1,2 min.:0.3 mm;
4.724 Inch \| 120 Millimeter x 5.118 Inch \| 130 Millimeter x 1.181 Inch \| 30 Millimeter IKO LRT12013030 Needle Non Thrust Roller Bearings	Dimension G:11.1 mm; Dimension B:92.1 mm; Dimension N:16.7 mm; Pin Dia A1:13.5 mm; Dimension H:27.0 mm; Basic Dynamic Radial Load Rating:14000 N; Dimension S1:19.8 mm; Basic Static Radial Load Rating Co:7800 N; Insert Bearing IB:ZMaRC; Dimension C:76.2 mm; Size (mm):4.724 Inch \| 120 Millimeter x 5.118 Inch \| 130 Millimeter x 1.181 Inch \| 30 Millimeter ;
0.472 Inch \| 12 Millimeter x 0.63 Inch \| 16 Millimeter x 0.551 Inch \| 14 Millimeter IKO LRTZ121614 Needle Non Thrust Roller Bearings	Calculation factor f2A:1; Preload class C GC:760 N; D:110 mm; d:70 mm; db min.:76 mm; Attainable speed for grease lubrication:17000 r/min; Preload class B GB:380 N; Basic dynamic load rating C:23.8 kN; Calculation factor f0:8.4; Calculation factor f1:1; Size (mm):0.472 Inch \| 12 Millimeter x 0.63 Inch \| 16 Millimeter x 0.551 Inch \| 14 Millimeter ;
11.811 Inch \| 300 Millimeter x 13.386 Inch \| 340 Millimeter x 4.646 Inch \| 118 Millimeter IKO LRT300340118 Needle Non Thrust Roller Bearings	Specific dynamic load factor K:25 N/mm²; B:12 mm; Mass bushing:0.008 kg; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.08; Tolerance housing:H7; Specific static load factor K0:45 N/mm²; d:6 mm; Permissible sliding velocity v max.:0.5 m/s; D:12 mm; Size (mm):11.811 Inch \| 300 Millimeter x 13.386 Inch \| 340 Millimeter x 4.646 Inch \| 118 Millimeter ;
0.512 Inch \| 13 Millimeter x 0.748 Inch \| 19 Millimeter x 0.472 Inch \| 12 Millimeter IKO TLAM1312 Needle Non Thrust Roller Bearings	Reference speed:560 r/min; r1,2 min.:1.5 mm; Mass bearing (including seat washer where applicable):34.5 kg; H:53 mm; Limiting speed:800 r/min; Minimum load factor A:62; D1 ≈:852.5 mm; d:850 mm; d1 ≈:917.5 mm; da min.:891 mm; Size (mm):0.512 Inch \| 13 Millimeter x 0.748 Inch \| 19 Millimeter x 0.472 Inch \| 12 Millimeter ;
1.772 Inch \| 45 Millimeter x 2.165 Inch \| 55 Millimeter x 1.181 Inch \| 30 Millimeter IKO TAF455530 Needle Non Thrust Roller Bearings	D:47.0000 mm; Basic Static Radial Load Rating Co:6950 N; Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:10600 N; Grease Speed Rating n1:12000 rpm; Oil Speed Rating n2:16000 rpm; d:25.000 mm; B:12.00 mm; Size (mm):1.772 Inch \| 45 Millimeter x 2.165 Inch \| 55 Millimeter x 1.181 Inch \| 30 Millimeter ;
1.772 Inch \| 45 Millimeter x 2.283 Inch \| 58 Millimeter x 0.787 Inch \| 20 Millimeter IKO RNA49/38UU Needle Non Thrust Roller Bearings	r1,2 min.:0.3 mm; Preload:2250 N; K:3 mm; Frictional moment:0.25 N·m; da min.:40 mm; a:90 mm; Static moment stiffness:290 N·m/mrad; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Static axial stiffnes:900 N/µm; Size (mm):1.772 Inch \| 45 Millimeter x 2.283 Inch \| 58 Millimeter x 0.787 Inch \| 20 Millimeter ;
IKO CRH44V Cam Follower and Track Roller - Stud Type	Grease Speed Rating n1:4300 rpm; Oil Speed Rating n2:5600 rpm; D:100.0000 mm; Fillet Radius ra:1.50 mm; d:55.000 mm; B:33.30 mm; Basic Static Radial Load Rating Co:47500 N; Sealed Speed Rating n3:4300 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:57200 N;
IKO CF6VUU Cam Follower and Track Roller - Stud Type	Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:28100 N; Sealed Speed Rating n3:4500 rpm; Grease Speed Rating Open/Shielded n1:7500 rpm; B:18.00 mm; Accessories:One Shield & Snap-Ri; D:90.0000 mm; Basic Static Radial Load Rating Co:21600 N; d:55.000 mm; Oil Speed Rating Open/Shielded n2:9000 rpm;
IKO CRE14VBUU Cam Follower and Track Roller - Stud Type	d:75.000 mm; B:45.00 mm; Sealed Speed Rating n3:2500 rpm; Grease Speed Rating Open/Shielded n1:3600 rpm; Accessories:One Shield; Basic Static Radial Load Rating Co:114000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; Fillet Radius ra:2.50 mm; D:190.0000 mm; Basic Dynamic Radial Load Rating C:153000 N;
2.375 Inch \| 60.325 Millimeter x 3 Inch \| 76.2 Millimeter x 1.75 Inch \| 44.45 Millimeter IKO LRB384828 Needle Non Thrust Roller Bearings	r1 max.:0.8 mm; r2 max.:1 mm; r1,2 min.:0.3 mm; Mass needle roller:2.74 g; Dw:4 mm; Lw:27.8 mm; Size (mm):2.375 Inch \| 60.325 Millimeter x 3 Inch \| 76.2 Millimeter x 1.75 Inch \| 44.45 Millimeter ;
IKO AZK12263.5 Thrust Roller Bearing	Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ min.:0.08; Mass bushing:0.0064 kg; B:8 mm; Specific static load factor K0:45 N/mm²; B1:3 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; D1:18 mm; D:14 mm;

IKO CRH9V Cam Follower and Track Roller - Stud Type Video

CRH9V IKO - Distributors, Price Comparison, and Datasheets ...

Find the best pricing for IKO CRH9V by comparing bulk discounts from 2 distributors. Octopart is the world's source for CRH9V availability, pricing, ...

CRH9V Cam Followers - McGill & Lily Interchange

LILY Part No. LCRH9V. Cross Reference, IKO. System of Measurement, Metric. Roller style, Stud Type. Class1, Inch Series CRH. Stud Dia, 6.35.

IKO Cam Followers (CRH9V)

Brand Name, IKO. Ean, 4549557022319. Number of Items, 1. Part Number, CRH9V. Specification Met, Upc. UNSPSC Code, 31160000 ...

IKO Cam Follower-INCH HD Full Comp Screwdriver Slot 9/16 ...

IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads.

IKO Inch Series Cam Followers CRH – Full Complement Type

A cam follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring. CRH9V – IKO Inch Series Cam Followers CRH – Full ...