| No. | Brand | J | N | b | H | S | h | a | F |
| YB84/MF3 | IKO | - | - | - | - | - | - | - | - |
| BA47ZOH | IKO | - | - | 7.2 mm | - | - | - | - | - |
| SB45A | IKO | - | - | - | - | - | - | - | - |
| PHS30L | IKO | - | - | - | - | - | - | - | - |
| GS6095 | IKO | - | - | - | - | - | 46.831 mm | - | - |
| CR20R | IKO | - | - | - | - | - | - | - | - |
| CF30UU | IKO | - | - | - | - | - | - | - | - |
| CF30BUUR | IKO | - | - | - | - | - | - | - | - |
| POS18A | IKO | - | - | - | - | - | - | - | - |
| LRT9010535 | IKO | - | - | - | - | - | - | - | - |
| IRB2210 | IKO | - | - | - | - | - | - | - | - |
| TAF172516 | IKO | - | - | - | - | - | - | - | - |
| CR22VUUR | IKO | - | - | - | - | - | - | - | - |
| CF3UU | IKO | - | - | - | - | - | - | - | - |
| NURT45-1R | IKO | - | - | - | - | - | - | - | - |
| PHSB 7-L | IKO | - | - | - | - | - | - | - | - |
| NART30VR | IKO | - | - | - | - | - | - | - | - |
| PHSA14 | IKO | - | - | - | - | - | - | - | - |
| CL20 | IKO | - | - | - | - | - | - | - | - |
| BHA2020ZOH | IKO | - | - | 6 mm | - | - | - | - | - |
| NART10R | IKO | - | - | - | - | - | - | - | - |
| RNA4924 | IKO | - | - | - | - | - | - | - | - |
| TLAM1312 | IKO | - | - | - | 53 mm | - | - | - | - |
| TAF739035 | IKO | 177.8 mm | - | - | - | 0.794 mm | - | 5.556 mm | - |
| 0.669 Inch | 17 Millimeter x 0.866 Inch | 22 Millimeter x 0.551 Inch | 14 Millimeter IKO LRTZ172214 Needle Non Thrust Roller Bearings | Calculation factor f0:7.2; d1 ≈:5 mm; Da max.:7.5 mm; Mass bearing:0.00051 kg; B:3 mm; Basic dynamic load rating C:0.225 kN; da max.:4.9 mm; Fatigue load limit Pu:0.003 kN; D:8 mm; D2 ≈:7.4 mm; Size (mm):0.669 Inch | 17 Millimeter x 0.866 Inch | 22 Millimeter x 0.551 Inch | 14 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 2.677 Inch | 68 Millimeter x 1.378 Inch | 35 Millimeter IKO LRT606835 Needle Non Thrust Roller Bearings | r min.:2.3 mm; Mass bearing:26.9 kg; B:120 mm; d1 ≈:135 mm; Maximum static radial loads F0r max.:570 kN; b:11.4 mm; D1 ≈:153.2 mm; D:225 mm; H max.:62.481 mm; Fatigue load limit Pu:98 kN; Size (mm):2.362 Inch | 60 Millimeter x 2.677 Inch | 68 Millimeter x 1.378 Inch | 35 Millimeter ; |
| 3.74 Inch | 95 Millimeter x 4.331 Inch | 110 Millimeter x 2.48 Inch | 63 Millimeter IKO LRT9511063 Needle Non Thrust Roller Bearings | Pa:26.7 kN; H1:152.4 mm; Da:240 mm; A1:133.35 mm; H2:60.325 mm; End plug (suffix Y):EPR 13; R1:79.375 mm; N1:25.4 mm; Appropriate attachment bolt size G:0.875 in; ba:63.5 mm; Size (mm):3.74 Inch | 95 Millimeter x 4.331 Inch | 110 Millimeter x 2.48 Inch | 63 Millimeter ; |
| 0.866 Inch | 22 Millimeter x 1.339 Inch | 34 Millimeter x 0.984 Inch | 25 Millimeter IKO TR223425 Needle Non Thrust Roller Bearings | with cylindrical bore:1 800 min-1; rs (min):2 mm; D:170 mm; with tapered bore:2 200 min-1; Pu:402 kN; B:60 mm; Static (Cor):5.5 mm; d:110 mm; Oil:79.040 kN; Dynamic (Cr):3 mm; Size (mm):0.866 Inch | 22 Millimeter x 1.339 Inch | 34 Millimeter x 0.984 Inch | 25 Millimeter ; |
| 1.625 Inch | 41.275 Millimeter x 2.188 Inch | 55.575 Millimeter x 1 Inch | 25.4 Millimeter IKO BR263516 Needle Non Thrust Roller Bearings | P180°:1900 kN; P120°:1700 kN; H2:100 mm; J1:160 mm; Pa:1200 kN; P0°:3800 kN; A:315 mm; Cap bolt, size:M 30x200; Locating ring:2 x FRB 10/440; Cap bolt, rec. tightening torque:400 N·m; Size (mm):1.625 Inch | 41.275 Millimeter x 2.188 Inch | 55.575 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 1.457 Inch | 37 Millimeter x 0.669 Inch | 17 Millimeter IKO RNA4904 Needle Non Thrust Roller Bearings | J max.:209.55 mm; N1:19.05 mm; Stabilizing ring:SR-11-9; A2:171.45 mm; Adapter sleeve assembly:SNW 11x2; Max. speed for Taconite seal:1575 r/min; Cap bolt recommended tightening torque:81.3 N·m; Ca:30.785 mm; P120°:17.3 kN; H1:69.85 mm; Size (mm):0.984 Inch | 25 Millimeter x 1.457 Inch | 37 Millimeter x 0.669 Inch | 17 Millimeter ; |
| IKO CF5FBUU Cam Follower and Track Roller - Stud Type | Calculation factor kr:0.11; Da max.:1012 mm; d:850 mm; Limiting speed:260 r/min; D1 ≈:972 mm; r1,2 min.:5 mm; s max.:10 mm; da min.:868 mm; D:1030 mm; E:986 mm; |
| IKO CRY52VUUR Cam Follower and Track Roller - Yoke Type | Calculation factor e:0.43; d:75 mm; d1 ≈:102.92 mm; Db min.:125 mm; ra max.:2 mm; Cb min.:10 mm; Fatigue load limit Pu:34 kN; T:41 mm; Basic dynamic load rating C:255 kN; Limiting speed:4800 r/min; |
| 1.375 Inch | 34.925 Millimeter x 1.625 Inch | 41.275 Millimeter x 0.75 Inch | 19.05 Millimeter IKO BA2212ZOH Needle Non Thrust Roller Bearings | Sealed Speed Rating n3:2400 rpm; D:180.0000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:124000 N; Accessories:Two Shields & Snap-R; Oil Speed Rating Open/Shielded n2:4000 rpm; Oil Speed Rating n2:4000 rpm; Grease Speed Rating Open/Shielded n1:3400 rpm; B:34.00 mm; d:100.000 mm; Size (mm):1.375 Inch | 34.925 Millimeter x 1.625 Inch | 41.275 Millimeter x 0.75 Inch | 19.05 Millimeter ; |
| IKO CFE 10-1 BUUR Cam Follower and Track Roller - Stud Type | Calculation factor Y1:2.8; H:238 mm; P55°:680 kN; S:2.5 mm; N:32 mm; da:100 mm; Pa:35 kN; Tightening torque for grub screws:8 N·m; P180°:340 kN; B:86 mm; |
| 0.787 Inch | 20 Millimeter x 0.945 Inch | 24 Millimeter x 0.787 Inch | 20 Millimeter IKO LRT202420 Needle Non Thrust Roller Bearings | Weight W:0.29 kg; Basic Dynamic Radial Load Rating C:14000 N; Dimension L:70.0 mm; Height H:124.0 mm; Diameter N:11.5 mm; Height T:38.8 mm; Dimension DA:63.5 mm; Basic Static Radial Load Rating Co:7800 N; Shaft Diameter D:25 mm; Dimension A1:30.0 mm; Size (mm):0.787 Inch | 20 Millimeter x 0.945 Inch | 24 Millimeter x 0.787 Inch | 20 Millimeter ; |
| IKO SBB142RS Plain Bearings | Grease Speed Rating Open/Shielded n1:3000 rpm; Fillet Radius ra:3.00 mm; B:54.00 mm; Sealed Speed Rating n3:2100 rpm; Basic Static Radial Load Rating Co:150000 N; Basic Dynamic Radial Load Rating C:186000 N; Accessories:Two Seals & Snap-Rin; d:90.000 mm; D:225.0000 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; |
| 2.362 Inch | 60 Millimeter x 2.677 Inch | 68 Millimeter x 1.024 Inch | 26 Millimeter IKO LRTZ606826 Needle Non Thrust Roller Bearings | B:434 mm; Basic dynamic load rating C:7040 kN; Thrust factor K:1.76; Calculation factor Y2:3; Calculation factor Y0:2; Comparative axial load rating CFa:301 kN; Calculation factor e:0.33; d:540 mm; T:400 mm; Mass bearing:400 kg; Size (mm):2.362 Inch | 60 Millimeter x 2.677 Inch | 68 Millimeter x 1.024 Inch | 26 Millimeter ; |
| 1.102 Inch | 28 Millimeter x 1.378 Inch | 35 Millimeter x 0.787 Inch | 20 Millimeter IKO TLA2820Z Needle Non Thrust Roller Bearings | D1:204 mm; Oil:1 000 min-1; dynamic Cr:376.640 kN; H:62 mm; rs (min):2 mm; Pu:36.380 kN; D:280 mm; Grease:750 min-1; d1:277 mm; static Cor:1240.000 kN; Size (mm):1.102 Inch | 28 Millimeter x 1.378 Inch | 35 Millimeter x 0.787 Inch | 20 Millimeter ; |
| IKO NAG4904 Plain Bearings | d3 max.:112.039 mm; Hydraulic nut:HMVC 17E; B1:83.871 mm; Mass adapter sleeve assembly:1.55 kg; Threads per inch:12; d1:73.025 mm; Lock nut:AN 17; B4:17.704 mm; Sleeve:S 117x2.7/8; Lock washer:W 17; |
| IKO CF10-1VUURM Cam Follower and Track Roller - Stud Type | Calculation factor Y0:1.6; b:13.9 mm; Calculation factor Y1:1.7; G1:22 mm; Basic dynamic load rating C:3086 kN; D:440 mm; B:180 mm; r1,2 min.:4 mm; d2 ≈:293 mm; B2 ≈:218 mm; |
IKO CR48VBUUE03 Cam Follower and Track Roller - Stud Type Video
IKO Cam Followers (CR48VBUUE03)
Brand Name, IKO. Ean, 4549557016158. Item Weight, 4.72 pounds. Material, cam. Number of Items, 1. Part Number, CR48VBUUE03. Specification Met, Upc.
iko cr48vbuue03 - Cam Follower and Track Roller - Stud Type
IKO IKO. CR48VBUUE03 · 3" Roller Diameter; 1-3/4" Roller Width; Flat Roller Surface Profile; 1-1/4" Stud Diameter; 1-1/4-12 Thread Size; Standard Stud Stud ...
iko cr48vbuue03 cr - series - MRO Supply
IKO CR48VBUUE03 CR - SERIES. Call or Chat for lead time confirm availability; Typically ships in: 1 day; Weight: 1.0 lb; Unit of measure: each. $94.41 Each.Brand: IKO BearingWeight: 1.0 lb
IKO International, Inc. - CR48VBUUE03 - Cam ...
CR48VBUUE03 from IKO International, Inc. at Allied Electronics & Automation.
IKO CR48VBUUE03 Cam Follower and Track Roller - Lily ...
Specifications ; Relubricatable, Yes ; Seal Type, Sealed ; Enclosure, Sealed ; Stud Diameter, 1.25 Inch | 31.75 Millimeter ; Roller Width, 1.75 Inch | 44.45 ...Roller Width: 1.75 Inch | 44.45 MillimeterThread Size: 1-1/4-12Other Features: Full ComplementSeal Type: Sealed
IKO - Heavy Duty, Cam Follower FACTORY - Rylan MRO
IKO CR48VBUUE03 Inch - Heavy Duty, Cam Follower FACTORY. ... Brand: IKO; UPC: CR 48 VBUUE03; Condition: New; Weight: 2.14 KGS. Current Stock: 1. Quantity:.
Solid Eccentric Stud Type Cam Followers - IKO日本トムソン
These are eccentric cam followers with a one-piece stud that can be mounted in the same mounting holes as those for Standard Type Cam Followers. The ...