| No. | Brand | J | N | b | H | S | h | a | F |
| AZ406013 | IKO | - | - | - | - | - | - | - | - |
| RNA49/38UU | IKO | - | - | - | - | - | - | 90 mm | - |
| BA2820ZOH | IKO | - | - | - | - | - | - | - | - |
| BA88ZOH | IKO | - | - | - | - | - | - | - | - |
| LRT9010535 | IKO | - | - | - | - | - | - | - | - |
| CFFU1-6 | IKO | - | - | - | - | - | - | - | - |
| CF20B | IKO | - | - | - | - | - | - | - | - |
| LRT12013030 | IKO | - | - | - | - | - | - | - | - |
| SB25A | IKO | - | - | - | - | - | - | - | - |
| CFE10-1UU | IKO | - | - | - | - | - | - | - | - |
| BAM1214 | IKO | - | - | - | - | - | - | - | - |
| AZK24031524 | IKO | - | - | - | - | - | - | - | - |
| TLAM3016 | IKO | - | - | - | - | - | - | - | - |
| RNA4910UU | IKO | - | - | - | - | - | - | - | - |
| YB86/MF3 | IKO | - | - | - | - | - | 69.85 mm | - | - |
| LRT151916 | IKO | - | - | - | - | - | - | - | - |
| TAF182620 | IKO | - | - | - | - | - | - | - | - |
| CRH12VBUU | IKO | - | - | - | - | - | - | - | - |
| CF10-1VUURM | IKO | - | - | 13.9 mm | - | - | - | - | - |
| CF6VUU | IKO | - | - | - | - | - | - | - | - |
| CL20 | IKO | - | - | - | - | - | - | - | - |
| TAF455530 | IKO | - | - | - | - | - | - | - | - |
| SB7011058 | IKO | - | - | mm | - | - | - | - | - |
| CF12VUU | IKO | - | - | - | - | - | - | - | - |
| CFE20-1VUUR | IKO | 196.85 mm | - | - | - | 0.794 mm | - | 5.556 mm | - |
| CF5FBUU | IKO | - | - | - | - | - | - | - | - |
| KT182416C3 | IKO | - | - | - | - | - | - | - | - |
| NAST20ZZR | IKO | - | - | 13.9 mm | - | - | - | - | - |
| 0.709 Inch | 18 Millimeter x 0.945 Inch | 24 Millimeter x 0.63 Inch | 16 Millimeter IKO KT182416C3 Needle Non Thrust Roller Bearings | D:140.0000 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:138000 N; B:52.00 mm; d:80.000 mm; Grease Speed Rating n1:8000 rpm; Basic Static Radial Load Rating Co:156000 N; Size (mm):0.709 Inch | 18 Millimeter x 0.945 Inch | 24 Millimeter x 0.63 Inch | 16 Millimeter ; |
| 3.543 Inch | 90 Millimeter x 4.134 Inch | 105 Millimeter x 1.378 Inch | 35 Millimeter IKO LRT9010535 Needle Non Thrust Roller Bearings | Fillet Radius ra:1.00 mm; Keyway f:3.2 mm; X-L-O Part Number:67-87; D:61.9100 mm; Grease Speed Rating Max. n1:14000 rpm; Oil Speed Rating Max. n2:18000 rpm; B:31.75 mm; Oil Mist Speed Rating Max. n3:28000 rpm; d:31.750 mm; Keyway e:32.6 mm; Size (mm):3.543 Inch | 90 Millimeter x 4.134 Inch | 105 Millimeter x 1.378 Inch | 35 Millimeter ; |
| 3.74 Inch | 95 Millimeter x 4.331 Inch | 110 Millimeter x 2.48 Inch | 63 Millimeter IKO LRT9511063 Needle Non Thrust Roller Bearings | Pa:26.7 kN; H1:152.4 mm; Da:240 mm; A1:133.35 mm; H2:60.325 mm; End plug (suffix Y):EPR 13; R1:79.375 mm; N1:25.4 mm; Appropriate attachment bolt size G:0.875 in; ba:63.5 mm; Size (mm):3.74 Inch | 95 Millimeter x 4.331 Inch | 110 Millimeter x 2.48 Inch | 63 Millimeter ; |
| IKO CF30-2BUUR Cam Follower and Track Roller - Stud Type | d:65.000 mm; Basic Radial Load Rating-Static SCO:60000 N; Speed Rating-Open and Shielded-Oil OSO:5600 rpm; Basic Radial Load Rating-Dynamic DC:92300 N; Diameter E:85.1 mm; Accessories:300SWI Non-Filling N; D:140.0000 mm; Width - Outer Ring B0:33.0 mm; Speed Rating-Open and Shielded-Grease OSG:4800 rpm; Fillet Radius ra:2.00 mm; |
| IKO CF3 Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:54000 N; Basic Static Radial Load Rating Co:41500 N; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:14000 rpm; Fillet Radius rb:1.00 mm; d:55.000 mm; Oil Speed Rating n2:21000 rpm; D:100.0000 mm; B:21.00 mm; |
| 0.669 Inch | 17 Millimeter x 0.866 Inch | 22 Millimeter x 0.551 Inch | 14 Millimeter IKO LRTZ172214 Needle Non Thrust Roller Bearings | Calculation factor f0:7.2; d1 ≈:5 mm; Da max.:7.5 mm; Mass bearing:0.00051 kg; B:3 mm; Basic dynamic load rating C:0.225 kN; da max.:4.9 mm; Fatigue load limit Pu:0.003 kN; D:8 mm; D2 ≈:7.4 mm; Size (mm):0.669 Inch | 17 Millimeter x 0.866 Inch | 22 Millimeter x 0.551 Inch | 14 Millimeter ; |
| IKO POSB 2.5-L Spherical Plain Bearings - Rod Ends | H2:44.45 mm; Mass pillow block:28.6 kg; P180°:36.9 kN; P150°:30.7 kN; Labyrinth ring (dc shaft position):LOR 60; Initial grease fill:365.71 g; Cap bolt recommended tightening torque:298.3 N·m; db:92.075 mm; ba:36.513 mm; Da:170 mm; |
| IKO PHSA14 Spherical Plain Bearings - Rod Ends | d:360 mm; das:402 mm; ra max.:4 mm; d1 ≈:412 mm; Fatigue load limit Pu:365 kN; Calculation factor Y:0.4; D1 ≈:486 mm; r1,2 min.:5 mm; Basic static load rating C0:4300 kN; Da max.:522 mm; |
| 0.512 Inch | 13 Millimeter x 0.748 Inch | 19 Millimeter x 0.472 Inch | 12 Millimeter IKO TLAM1312 Needle Non Thrust Roller Bearings | Reference speed:560 r/min; r1,2 min.:1.5 mm; Mass bearing (including seat washer where applicable):34.5 kg; H:53 mm; Limiting speed:800 r/min; Minimum load factor A:62; D1 ≈:852.5 mm; d:850 mm; d1 ≈:917.5 mm; da min.:891 mm; Size (mm):0.512 Inch | 13 Millimeter x 0.748 Inch | 19 Millimeter x 0.472 Inch | 12 Millimeter ; |
| IKO CRY52VUUR Cam Follower and Track Roller - Yoke Type | Calculation factor e:0.43; d:75 mm; d1 ≈:102.92 mm; Db min.:125 mm; ra max.:2 mm; Cb min.:10 mm; Fatigue load limit Pu:34 kN; T:41 mm; Basic dynamic load rating C:255 kN; Limiting speed:4800 r/min; |
| 2.874 Inch | 73 Millimeter x 3.543 Inch | 90 Millimeter x 0.984 Inch | 25 Millimeter IKO TAF739025 Needle Non Thrust Roller Bearings | Basic Static Radial Load Rating Co:43000 N; Accessories:One Shield; d:30.000 mm; Oil Speed Rating n2:8500 rpm; B:30.20 mm; Grease Speed Rating n1:6300 rpm; Basic Dynamic Radial Load Rating C:46800 N; Sealed Speed Rating n3:6300 rpm; D:72.0000 mm; Fillet Radius ra:1.00 mm; Size (mm):2.874 Inch | 73 Millimeter x 3.543 Inch | 90 Millimeter x 0.984 Inch | 25 Millimeter ; |
| IKO SB25A Plain Bearings | G:139.624 mm; B4:27 mm; B1:84.582 mm; B:24.079 mm; Lock washer:W 028; d3 max.:165.227 mm; Lock nut:N 028; Sleeve:S 3028x5; Hydraulic nut:HMVC 28E; d:140 mm; |
| IKO CFES8R Cam Follower and Track Roller - Stud Type | D:95 mm; Coefficient of friction µ max.:0.15; Tolerance shaft:e7; a:7 mm; Coefficient of friction µ min.:0.08; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v max.:0.5 m/s; α:124 °; Mass bushing:2.55 kg; d:80 mm; |
| 3.937 Inch | 100 Millimeter x 4.724 Inch | 120 Millimeter x 1.024 Inch | 26 Millimeter IKO TAF10012026 Needle Non Thrust Roller Bearings | D1 ≈:148 mm; B:65 mm; Misalignment factor k1:0.09; d2 ≈:120 mm; Da max.:154 mm; Mass bearing:5.2 kg; da max.:119 mm; s2 max.:7.3 mm; ra max.:2 mm; Operating clearance factor k2:0.125; Size (mm):3.937 Inch | 100 Millimeter x 4.724 Inch | 120 Millimeter x 1.024 Inch | 26 Millimeter ; |
| 0.866 Inch | 22 Millimeter x 1.102 Inch | 28 Millimeter x 0.472 Inch | 12 Millimeter IKO TLA2212Z Needle Non Thrust Roller Bearings | Basic static load rating C0:17300 kN; C:400 mm; Mass bearing:640 kg; d:460 mm; Fatigue load limit Pu:1340 kN; F:518 mm; Basic dynamic load rating C:8090 kN; D1 ≈:617.5 mm; B:400 mm; Design variant/feature:BC4.6/W33; Size (mm):0.866 Inch | 22 Millimeter x 1.102 Inch | 28 Millimeter x 0.472 Inch | 12 Millimeter ; |
| IKO NURT45-1R Cam Follower and Track Roller - Yoke Type | Housing material:Cast iron; A:38.5 mm; N4:4 mm; Hexagonal key size for grub screw N:3.969 mm; Housing:FY 508 M; T:49.9 mm; SWN:7 mm; J7:34 mm; J6:118 mm; Bearing:YAR 208-107-2F; |
IKO PHS30L Spherical Plain Bearings - Rod Ends Video
IKO phs30l bearing - IKO left hand lubrication type rod end with ...
IKO PHS30L - IKO Left Hand Lubrication Type Rod End With Female Thread g IKO sbb96 bearing IKO sbb80-2rs bearing IKO sbb80 bearing IKO sbb76-2rs bearing IKO ...
PHS30L IKO • ABF Store
PHS30L IKO available at ABF.store ✓ Same-day shipment ✓ 10.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8 languages.
IKO PHS30L Rod End Joint Bearings 30x70x41mm - eBay
Find many great new & used options and get the best deals for IKO PHS30L Rod End Joint Bearings 30x70x41mm at the best online prices at eBay!
PHS30L - IKO Left Hand Rod End - Quality Bearings Online
Product: PHS30 Left Hand Lubrication Type Rod End With Female Thread | Brand: IKO | Size: 30 | Price: £52.67 | In Stock | Same Day Despatch | All Orders ...
IKO PHS 30L ROD END BEARINGS 30mm ID, 70mm OD ...
Item Weight, 1.24 Kilograms ; Bore Diameter, 30.00 millimeters ; Brand Name, IKO ; Ean, 4549557049699 ; Inside Diameter, 30.00 millimeters.Item Diameter: 70.00 millimetersItem Dimensions LxWxH: 1.18 x 5.71 x 2.76 in...
IKO PHS30L - METRIC - FEMALE THREAD ROD ENDS | DXP ...
Bearing Type. Rod End ; Dynamic Load Rating. 62300 ; Material - Outer Member. Carbon Steel ; Mounting Method. M30X2 ; Operating Temperature. - 20C to 180 C.
Pillow Ball Bearings, PHS and POS Series (IKO) (PHS30L)
Pillow Ball Bearings, PHS and POS Series (IKO) (PHS30L) ; Total: $184.58 ; Ship Date: Tue. Mar 08, 2022 ; Type, Rod End Bearing ; Rod End Bearing Type, Standard.Type: Rod End BearingConnecting Thread Direction: Left ScrewBall Material: SteelLiner Material: Special Copper Alloy