| FAG 718/530-MP-P5 Angular Contact Ball Bearings | B:20.904 mm; Sleeve:S 3024x4.3/16; d:120 mm; G:119.786 mm; d1:106.362 mm; B4:23.825 mm; Lock nut:N 024; Hydraulic nut:HMVC 24E; Threads per inch:12; Mass adapter sleeve assembly:2.8 kg; |
| FAG 1224-M-C3 Self Aligning Ball Bearings | Roller and cage thrust assembly:K 89307 TN; d1:68 mm; Basic dynamic load rating C:62 kN; D1:37 mm; Limiting speed:4800 r/min; Minimum axial load factor A:0.00387; ra max.:1 mm; Reference speed:2400 r/min; H:20 mm; Shaft washer:WS 89307; |
| FAG 21316-E1-TVPB-C3 Roller Bearings | J min.:244.475 mm; P120°:30.2 kN; Stabilizing ring:SR-16-13; A2:126.603 mm; Pa:7.83 kN; P180°:31.6 kN; Cap bolt, SAE grade:5; Initial grease fill:87.885 g; A1:88.9 mm; h:31.75 mm; |
| FAG 7413-B-MP Angular Contact Ball Bearings | Ca:82.804 mm; Housing:SAF 620; Max. speed for Taconite seal:900 r/min; ba:45.244 mm; P120°:72.5 kN; PG:1/4 NPT; Cap bolt, SAE grade:8; J min.:336.55 mm; Mass pillow block:45.9 kg; L:419.1 mm; |
| FAG 22264-MB-C2 Spherical Roller Bearings | Basic Static Radial Load Rating Co:35500 N; Fillet Radius ra:1.00 mm; Accessories:Without Accessories; B:20.00 mm; Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:42300 N; d:75.000 mm; Oil Speed Rating Open/Shielded n2:6700 rpm; D:115.0000 mm; Grease Speed Rating Open/Shielded n1:5600 rpm; |
| 45 mm x 90 mm x 10 mm FAG 52211 Thrust Ball Bearing | Housing:SAFS 238; Bearing:22238 CC/W33; Mass pillow block:208 kg; Taconite seal (dc shaft position):TER 160; Eye bolt:2 x 3/8-16 UNC; H:398.462 mm; S:4.763 mm; R1:120.65 mm; P90°:249 kN; RG:1 NPT; Size (mm):45 mm x 90 mm x 10 mm ; |
| FAG HSS7017-C-T-P4S-DUL Precision Ball Bearings | Dimension S:0.625 in; D_SEL:1/4-28; Outher Width C:0.7087 in; ANGLE:135 º; D11:1.563 in; Diameter D3:1.563 in; Weight W:0.55 lb; ZZ:0.06 in; Basic Static Radial Load Rating Co:2520 lbf; Bore Diameter D:1 1/4 in; |
| 5 mm x 16 mm x 5 mm FAG 625-2RSR Single Row Ball Bearings | Mass adapter sleeve assembly:20.5 kg; Sleeve:S 3056x9.15/16; Hydraulic nut:HMVC 56E; B:38.354 mm; Lock nut:N 056; B1:156.997 mm; Locking plate:PL 56; G:279.502 mm; Threads per inch:6; d1:252.412 mm; Size (mm):5 mm x 16 mm x 5 mm ; |
| FAG DSH.6313-RSR Single Row Ball Bearings | B1:mm; rs Dynamic (Cr):3 mm; Static (Cor):100.630 kN; D:180 mm; with cylindrical bore:4 000 min-1; B:41 mm; Oil:3 300 min-1; Pu:37.600 kN; d:85 mm; with tapered bore:1317 ; |
| FAG 6307-MA-C4 Single Row Ball Bearings | f:4 mm; d2:28 mm; M:13.5 mm; Mass lock washer:0.0035 kg; d:15 mm; B:1.2 mm; d1:21 mm; |
| FAG 3305-B-TNH-C3 Angular Contact Ball Bearings | N1:19.05 mm; A1:98.425 mm; Labyrinth ring:2 x LOR 45; Cap bolt recommended tightening torque:515.2 N·m; H1:107.95 mm; Da:170 mm; RG:3/8 NPT; Stabilizing ring:SR-19-16; H:209.55 mm; End plug (suffix Y):EPR 8; |
| FAG HS7011-C-T-P4S-UL Precision Ball Bearings | D1 ≈:604 mm; D:710 mm; Minimum load factor A:60; Da max.:647 mm; da min.:663 mm; Limiting speed:800 r/min; r1,2 min.:3 mm; Basic dynamic load rating C:475 kN; H:67 mm; Mass bearing (including seat washer where applicable):48 kg; |
| FAG B71952-E-T-P4S-UL Precision Ball Bearings | Fillet Radius ra:2.00 mm; d:88.903 mm; Preload:800 lb; Keyway e:89.5 mm; Grease Speed Rating Max. n1:500 rpm; D:160.3000 mm; Keyway f:6.4 mm; B:76.20 mm; Oil Mist Speed Rating Max. n3:2000 rpm; X-L-O Part Number:165-27; |
| FAG 7230-B-MP-P5-UL Precision Ball Bearings | Sealed Speed Rating n3:11000 rpm; D:47.0000 mm; d:17.000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:11000 rpm; B:22.20 mm; Basic Dynamic Radial Load Rating C:21600 N; Accessories:One Shield & Snap-Ri; Oil Speed Rating n2:14000 rpm; Basic Static Radial Load Rating Co:12700 N; |
| FAG 6013-M-C3 Single Row Ball Bearings | Ca min.:5 mm; Fatigue load limit Pu:11.8 kN; Da max.:76.5 mm; T:23.812 mm; Basic static load rating C0:106 kN; Reference speed:6700 r/min; Da min.:71 mm; r3,4 min.:0.8 mm; d:38.1 mm; Calculation factor Y0:1; |
| FAG B7005-C-2RSD-T-P4S-UL Precision Ball Bearings | d:63.5 mm; D:100.013 mm; ra max.:0.6 mm; da min.:68.3 mm; rb max.:1 mm; Specific dynamic load factor K:100 N/mm²; α:6 °; Mass plain bearing:1.85 kg; Design (sliding contact surface combination):Steel/steel, heavy-d; dk:91.186 mm; |